Bent track from a backed-into bumper or a worn roller riding rough can pull a door clean off its rails. We fix the immediate problem and the root cause.
Fixing the symptom without finding the cause usually means the same problem returns within weeks.
A track that's even slightly off vertical puts uneven stress on rollers and hardware every single cycle.
Track that's visibly bent or dented from impact gets replaced rather than hammered back into shape.
Vehicle impacts often bend both the track and the bracket mounting it to the frame. We check both.
Each service below is handled by a technician trained specifically for this kind of repair, not a generalist guessing at it.
We realign horizontal and vertical track sections together, since a shift in one usually affects the other.
A replaced section restores the correct roller path immediately, without the recurring wear a straightened section can develop.
A roller jumping the track repeatedly usually means the rollers themselves need replacing along with the fix.
Collision damage often affects more than the visible dent. We check the full track and frame mounting system.
Loose or cracked wall brackets let the track shift under normal operation. We reinforce or replace mounting hardware as part of the repair.
Let us know if the door is jammed off-track or just running rough, and we'll prioritize accordingly.
Technicians carry standard track sections and mounting hardware for common configurations.
A full inspection prevents a quick patch that fails again within weeks.
Track realigned or replaced, verified plumb, and tested through a full cycle before we leave.
“Backed the truck into the door and bent the track pretty badly. Replaced the section and it runs like new.”
“Track was off plumb by more than it looked. Fixed properly instead of a quick patch.”
“Appreciated that they checked the wall brackets too, not just the visible bent section.”
A combination of a worn roller and slightly bent track is one of the most common causes we see.
We don't recommend it. Forcing a door back on the track can cause further damage or personal injury.
Minor bends can sometimes be straightened, but visibly dented or kinked sections are usually replaced for a more durable fix.
Pricing varies with the extent of the damage, quoted upfront before any repair begins.
No, we recommend not operating the door until it's repaired, since further damage or injury risk increases with continued use.
A straightforward realignment often takes under an hour; a full section replacement may take a bit longer.
Licensed technicians, flat-rate pricing, and a truck stocked for this exact job.
☎ Call +1-831-293-1591Technicians are positioned throughout Northwest Ithaca for fast response, and we cover the surrounding zip codes too.
Embedded Map Placeholder for Northwest Ithaca, NY